Fiber Bragg Grating Displacement Sensor with High Abrasion Resistance for a Steel Spring Floating Slab Damping Track

Abstract

This paper presents a fiber Bragg grating (FBG) displacement sensor with high abrasion resistance for displacement monitoring of a steel spring floating slab damping track. A wedge-shaped sliding block and an equal-strength beam form a conversion mechanism to transfer displacement to the deflection of the beam, and the deflection-induced strain is exerted on two FBGs. A special linear guide rail-slider and a precision rolling bearing have been adopted onto the conversion mechanism, which turned sliding friction into rolling friction and thus significantly reduced the friction during frequent alternating displacement measuring. Sensing principle and the corresponding theoretical derivation have been demonstrated. Experiment results show that the sensor has a sensitivity of 34.32 pm/mm and a high resolution of 0.0029 mm within a measurement range of 0~90 mm. Besides, the sensor has also a good measurement capability for micro-displacement within a range of 0~3 mm. The repeatability error and hysteresis error are 1.416% and 0.323%, respectively. Good creep resistance and high abrasion resistance for alternating displacement measurement have also been presented by a performance test. These excellent performances satisfy the requirements of high precision and long-term stability in structural health monitoring for machinery equipment and civil engineering, especially in the displacement monitoring of a floating slab damping track.

The Influence of Zinc Waste Filler on the Tribological and Mechanical Properties of Silicone-Based Composites

“…Precise process control is of great importance to ensure reproducible products and to control the properties of materials [7]. In turn, improving mechanical properties enables the use of such materials in modern, innovative, and unusual solutions [8][9][10]. An important aspect of new materials is their environmental nontoxicity, which includes both the impact of the material itself and its possible degradation products [11].…”

Special Issue “Fibre Optic Sensors for Structural and Geotechnical Monitoring”

“…Paper [8] presents a displacement sensor developed for structural health monitoring in the civil engineering field, with specific potential applications to monitor spring dampers for floating slab installation. The displacement sensor design is based on a sliding block that affects the deflection of a cantilever; the cantilever deflection is monitored by two fibre Bragg grating sensors.…”

Long-Term Monitoring for Track Slab in High-Speed Rail via Vision Sensing

“…The pixels in the image are divided into two classes by a gray level threshold k, namely, background C0 and foreground C1, in which the gray level range of C0 is [0, k] whereas that of C1 is [k + 1, L -1]. So the probabilities of background C0 and foreground C1 are expressed as (10) and (11) respectively.…”

“…In this regard, long-term monitoring for the structural conditions can be a good way to detect the initiation and development of potential defects and schedule maintenance works accordingly. Deformation monitoring for track structure is usually achieved with linear variable differential transformer (LVDT)-based system [10][11][12][13], which can measure structural displacement with transducers, mounted on the track and external data acquisition instrument. However, as it needs fixed installation on the structure, the in-situ installation can cost a long time and a lot of manpower.…”