FEM-Based Power Transformer Model for Superconducting and Conventional Power Transformer Optimization

Abstract

There were many promising superconducting materials discovered in the last decades that can significantly increase the efficiency of large power transformers. However, these large machines are generally custom-made and tailored to the given application. During the design process the most economical design should be selected from thousands of applicable solutions in a short design period. Due to the nonlinearity of the task, the cost-optimal transformer design, which has the smallest costs during the transformers’ planned lifetime, is usually not the design with the highest efficiency. Due to the topic’s importance, many simplified transformer models were published in the literature to resolve this problem. However, only a few papers considered this preliminary design optimization problem in the case of superconducting transformers and none of them made a comparison with a validated conventional transformer optimization model. This paper proposes a novel FEM-based two-winding transformer model, which can be used to calculate the main dimension of conventional and superconducting transformer designs. The models are stored in a unified JSON-file format, which can be easily integrated into an evolutionary or genetic algorithm-based optimization. The paper shows the used methods and their accuracy on conventional 10 MVA and superconducting 1.2 MVA transformer designs. Moreover, a simple cost optimization with the 10 MVA transformer was performed for two realistic economic scenarios. The results show that in some cases the cheaper, but less efficient, transformer can be the more economic.

Remanufacturing a Synchronous Reluctance Machine with Aluminum Winding: An Open Benchmark Problem for FEM Analysis

“…Because of this, the loss due to circulating currents between the parallel coil paths was considered negligible, as was the case in the work of Widmer et al [83]. The eddy current loss can be more precisely approximated by the axial (B ax ) and radial (B rad ) components of magnetic induction when using the FEM-based magnetic field calculations that were presented in [84,85]. The axial and radial components of the eddy current loss for rectangular-shaped conductors are shown in Equations ( 19) and (20).…”

Circular Economy Aspects of Permanent Magnet Synchronous Reluctance Machine Design for Electric Vehicle Applications: A Review

“…AC loss depends on several factors, including conductor dimensions, frequency, and amplitude of the magnetic field [146,147]. For a more precise estimation of the eddy current loss, FEM-based magnetic field calculations are used, which consider both the axial (B ax ) and radial (B rad ) components of magnetic induction [148,149]. The axial and radial components of the eddy current loss for rectangular-shaped conductors can be found in Equations ( 3) and ( 4).…”

Analysis of Transformer No-Load Loss Using Finite Element Method Validated by Experimental Tests

“…Finite element method (FEM) is a robust method for solving electromagnetic problems [7], [8] including highly superior numerical accuracy in complex phenomena and electromagnetic field distribution analysis [9], [10]. In addition, FEM can directly obtain the result while avoiding complex modeling processes [11].…”