Features of Ni-W Plating Film Obtained by the Jet-Flow System

Abstract

Chromium plating has excellent corrosion resistance and is widely used in industry. However, it also has a high environmental load. As an alternative, electric Ni-W plating is attracting attention. However, it is not widely used because the stress is high and the film is prone to cracks. Furthermore, although it is necessary to thicken the film to improve the corrosion resistance, there are also problems that the current efficiency is low and the plating time is long. Therefore, we investigate a film with high corrosion resistance by using the jet-flow plating method that enables plating at a high current density. Our results show that the jet-flow plating enables plating of 50 µm, and high corrosion resistance is obtained by randomly generating fine cracks in the film at 20 A·dm−2. We also found that the stress changed depending on the current density and shape of the crack also changed.