Fe3O4-Nanoparticle-Doped Epoxy Resin as a Detachable Adhesive by Electromagnetic Heating for GFRP Single-Lap Joints

Abstract

An adhesive based on a Fe3O4-nanoparticle (MNP)-doped epoxy resin was proposed for the development of detachable adhesive joints with GFRP substrates. The analysis of cryofractures showed that the increasing MNP content promotes a higher presence of larger aggregates and a lower sedimentation of nanoparticles due to the higher viscosity of the mixture. In this regard, the inclusion of expandable microspheres (MS) induces a more uniform dispersion of MNPs, reducing their sedimentation. The capability of the proposed adhesives for electromagnetic (EM) heating was also evaluated, with increases in temperature of around 100 °C at 750 A, enough to reach the Tg of the polymer required to facilitate the adhesive detachment, which is around 80 °C. Finally, the lap shear strength (LSS) of 14 and 20 wt.% MNP samples was evaluated in a single-lap shear joint with simultaneous EM heating. The LSS values were reduced by 60–80% at 750 A, thus promoting successful adhesive joint detachment under EM heating.