Fault tolerant control based on backstepping nonsingular terminal integral sliding mode and impedance control for a lower limb exoskeleton

Abstract

In this paper, an active fault-tolerant control scheme is proposed for a lower limb exoskeleton, based on hybrid backstepping nonsingular fast terminal integral type sliding mode control and impedance control. To increase the robustness of the sliding mode controller and to eliminate the chattering, a nonsingular fast terminal integral type sliding surface is used, which ensures finite time convergence and high tracking accuracy. The backstepping term of this controller guarantees global stability based on Lyapunov stability criterion, and the impedance control reduces the interaction forces between the user and the robot. This controller employs a third order super twisting sliding mode observer for detecting, isolating ad estimating sensor and actuator faults. Motion stability based on zero moment point criterion is achieved by trajectory planning of waist joint. Furthermore, the highest level of stability, minimum error in tracking the desired joint trajectories, minimum interaction force between the user and the robot, and maximum system capability to handle the effect of faults are realized by optimizing the parameters of the desired trajectories, the controller and the observer, using harmony search algorithm. Simulation results for the proposed controller are compared with the results obtained from adaptive nonsingular fast terminal integral type sliding mode control, as well as conventional sliding mode control, which confirm the outperformance of the proposed control scheme.

Robust adaptive backstepping control for a lower-limb exoskeleton system with model uncertainties and external disturbances

“…In other work on adaptive control, a new fast terminal sliding mode controller is introduced by Mokhtari et al [28] to reduce the chattering phenomena and ensure the finite-time convergence. A very recent work on backstepping non-singular fast terminal integral-type sliding mode is carried out for a lower-extremity exoskeleton in active-assist mode [29]. Simulation runs for the proposed control scheme show improved results compared to adaptive non-singular fast terminal integral-type sliding mode control and conventional sliding mode control.…”