Fallversuche auf dem Prüfstand / Drop Tests on Test Stand

Sperber, A.; Romberg, Hans; Schlehlein, S.

doi:10.1515/mt-1995-370917

Cited by 1 publication

(1 citation statement)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The vibration decays according to the damping ratio

ζ

. Equation (4) relates eigenfrequency

f_{0}

and damping ratio

ζ

to the spring constant

k

and damping constant

b

, respectively 8,9

2 {πf}_{0} goodbreak= \sqrt{\frac{k}{m_{1} + m_{2}}} and ζ goodbreak= \frac{b}{4 π f_{0} ((), m_{1} goodbreak+ m_{2})}

…”

Section: Methodsmentioning

confidence: 99%

Improved criteria for evaluating impact targets in regulative drop tests of dangerous goods packagings

et al. 2023

View full text Add to dashboard Cite

For dangerous goods packagings, drop testing onto an essential unyielding target can be used to assess the mechanical resistance to impact loads. Adopted regulations like Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)/Regulation concerning the International Carriage of Dangerous Goods by Rail (RID) require that the impact surface provided shall be integral with a mass at least 50 times than that of the heaviest package to be tested. The problem is that many manufacturers do not possess impact targets that satisfy the required 50 times mass ratio for regulative drop tests during series production. The objective of this work is to verify existing and define improved criteria for impact target structures based on systematic investigations. Previous evidence highlights the relevance of other parameters in addition to the mass ratio. Therefore, in this research, a variation of drop test parameters was carried out experimentally. Furthermore, numerical vibration analysis was applied to investigate the deformability of the impact surface. The results conclude that the mass ratio of 1:50 cannot be defined as a decisive criterion. In order to determine the influence of further drop test parameters, the research findings were used to validate a parametric model that assesses impact target deflection. An approximation quality of over 90% was achieved. As a result, new evaluation criteria are proposed. First, a method for identifying critical impact target designs is provided. Second, a new comprehensive formula compares the approximated maximum deflection of a real impact target to the respective theoretical threshold derived from a worst‐case assumption. In practice, this leads to great advantages in the evaluation of already installed impact targets for dangerous goods packagings.

show abstract

“…The vibration decays according to the damping ratio