Factors affecting the selectivity of the photocatalytic conversion of nitroaromatic compounds over TiO2 to valuable nitrogen-containing organic compounds

Abstract

The photocatalytic conversion of various nitroaromatic compounds in alcohols employing four different types of TiO 2 (Sachtleben Hombikat UV100 as anatase, Crystal Global R34 as rutile, Evonik-Degussa Aeroxide P25 as an anatase-rutile mixture, and home-made mesoporous anatase) has been studied.The effect of platinization of these different types of TiO 2 on the reaction sequence has also been investigated. Upon irradiation of an ethanolic solution of m-nitrotoluene, as a model reaction, in the presence of the bare photocatalyst, different products were obtained according to the applied photocatalyst. It was found that the surface properties of the photocatalyst play an important role in the reaction pathway and thus in the selectivity of the products. In all cases, a simultaneous reduction of the nitro compound and an oxidation of the alcohol are induced by the photogenerated electrons and holes, respectively. An imine is then produced upon condensation of the generated aldehyde and amino compounds. Rutile was found to be more selective towards the primary amino compound (m-toluedine) while anatase catalysts gave a mixture of m-toluidine and its imine (N-ethylidene-3-methylaniline). A cyclization reaction of the produced imine to generate methyl quinoline was observed when Aeroxide P25 was used as a photocatalyst. Employing platinized TiO 2 , the hydrogenation of the produced imine yielding N-alkylated products was found to occur in all cases.However, the selectivity towards the mono N-alkylated product was the best using platinized Hombikat UV100. This selectivity was found to be also influenced by the loaded amount of Pt, the platinization method, and the illumination time but not by the light intensity.

TiO2 photocatalysis for the degradation of pollutants in gas phase: From morphological design to plasmonic enhancement

“…At this point it is important to stress that although this review is written from the perspective of air purification, photocatalysis is also a promising technology in the fields of (waste)water purification, [13][14][15] photovoltaics/artificial photosynthesis [16,17] and environmentally friendly organic synthesis. [18][19][20] Given the vast amount of information available on the topic, it is impossible to include all contributions to the field. In addition, many different aspects of TiO 2 photocatalysis and catalyst modification have been reviewed individually.…”

Design Synthesis of Nitrogen-Doped TiO2@Carbon Nanosheets toward Selective Nitroaromatics Reduction under Mild Conditions

“…Aromatic amines, synthesized by selective reduction of nitroaromatics, are important intermediates for the manufacturing of various fine chemicals. [1][2][3][4][5][6][7][8][9][10][11][12] Traditionally, these compounds are produced by non-catalytic processes involving stoichiometric Fe or Zn reagents in the presence of various proton sources, [13][14] or by other catalytic protocols employing heterogeneous copper, nickel or platinum-group metals. [1][2]4 These manufactures, however, are increasingly required to reduce the environmental impact of their processes and to increase their feedstock and energy efficiency.…”

Recent Advances in the Synthesis of Metal Oxide Nanofibers and Their Environmental Remediation Applications

“…In general, a combination of several approaches gives high treatment efficiency compared with existing treatments. For example, a certain pollutant can hardly be degraded by photolysis with conventional photocatalysts in the ambient environment and treated wastewater may need more steps for total mineralization [1][2][3][4]. However, a combination of several methods, such as synthesizing suitable nanostructured catalysts and optimizing the wavelength of light exposure depending on the selection semiconductor material with favorable bandgap energy, improves the degradation of pollutants from the wastewater [5][6][7].…”