Facile Spray-Coating Process for the Fabrication of Tunable Adhesive Superhydrophobic Surfaces with Heterogeneous Chemical Compositions Used for Selective Transportation of Microdroplets with Different Volumes

Abstract

In this paper, tunable adhesive superhydrophobic ZnO surfaces have been fabricated successfully by spraying ZnO nanoparticle (NP) suspensions onto desired substrates. We regulate the spray-coating process by changing the mass percentage of hydrophobic ZnO NPs (which were achieved by modifying hydrophilic ZnO NPs with stearic acid) in the hydrophobic/hydrophilic ZnO NP mixtures to control heterogeneous chemical composition of the ZnO surfaces. Thus, the water adhesion on the same superhydrophobic ZnO surface could be effectively tuned by controlling the surface chemical composition without altering the surface morphology. Compared with the conventional tunable adhesive superhydrophobic surfaces, on which there were only three different water sliding angle values: lower than 10°, 90° (the water droplet is firmly pinned on the surface at any tilted angles), and the value between the two ones, the water adhesion on the superhydrophobic ZnO surfaces has been tuned effectively, on which the sliding angle is controlled from 2 ± 1° to 9 ± 1°, 21 ± 2°, 39 ± 3°, and 90°. Accordingly, the adhesive force can be adjusted from extremely low (∼2.5 μN) to very high (∼111.6 μN). On the basis of the different adhesive forces of the tunable adhesive superhydrophobic surfaces, the selective transportation of microdroplets with different volumes was achieved, which has never been reported before. In addition, we demonstrated a proof of selective transportation of microdroplets with different volumes for application in the droplet-based microreactors via our tunable adhesive superhydrophobic surfaces for the quantitative detection of AgNO3 and NaOH. The results reported herein realize the selective transportation of microdroplets with different volumes and we believe that this method would potentially be used in many important applications, such as selective water droplet transportation, biomolecular quantitative detection and droplet-based biodetection.

Controllable domain morphology in coated poly(lactic acid) films for high-efficiency and high-precision transportation of water droplet arrays

“…Therefore, taking account of how to gain tunable adhesion in a superhydrophobic surface, how f 1 can be adjusted using surface morphology becomes very important. 20 and stereo-complex co-crystallization, 21 have been developed to realize a tunable adhesive superhydrophobic surface with heterogeneous chemical compositions. Inevitably, most of these methods suffer from the use of expensive lowsurface-energy components (e.g.…”

Superhydrophobic surfaces for corrosion protection: a review of recent progresses and future directions

“…Depending on the contact angle hysteresis (CAH) values, superhydrophobicity can be further categorized into different states. 5 While some superhydrophobic surfaces might exhibit high CAH and strong adhesion to water (also known as adhesive superhydrophobicity), 4,6,7 the surfaces of interest in this paper refer to those having very low CAHs and thus high water repellency.…”

Flow-Based Surface Decoration of Microparticles with Titania and Other Transition Metal Oxide Nanoparticles

“…With this goal in mind, we began to seek an engineering-based solution to the problem. Aware of spray-coating and evaporative approaches for formation of multilayered and decorated particles or substrates [33][34][35], we developed a packed-bed, flow-based approach to achieve the same result.…”