Facile compliance-based pump for blood physiometer

Abstract

The biomechanical properties of blood are considered promising label-free biomarkers for early disease detection. Disposable pumps have been suggested as replacements for bulky and expensive syringe pumps. However, they have limitations, including initial air bubble removal, simple stop-and-run flow control, and quantification of many rheological properties. In this study, a compliance-based pump (CP) is developed by fitting a blood-loaded syringe, an air-compliance unit, and a needle into each port of a three-way valve. When blood is loaded into the microfluidic channel from the CP, the initial air bubbles are removed from the channels. By manipulating the three-way valve, blood flow is stopped immediately. Red blood cell (RBC) aggregation index (AI) is obtained by analyzing microscopic blood images. The air-compliance unit induces a transient blood flow. The time-resolved micro-particle image velocimetry technique is employed to obtain the blood velocity. The flow rate and time constant are obtained by assuming the flow rate as Q (t) = Q1 exp(−t/λ1) + Q2 exp(t/λ2) and conducting nonlinear regression analysis. The proposed method is employed to obtain the properties (AI, Q1, Q2, λ1, and λ2) of suspended bloods (hematocrit = 30%–70%, 5–30 mg/ml dextran solution, and heat-shocked RBCs). It is also used to detect four different types of suspended blood prepared by adding two types of RBCs (normal or hardened RBCs) to two types of diluents (1 × phosphate-buffered saline or dextran). In conclusion, the proposed method can be used to detect differences in suspended blood by manipulating the CP and consistently analyzing microscopic blood images.