Fabrication of Poly(ethylene glycol) Hydrogel Microstructures Using Photolithography

Abstract

The fabrication of hydrogel microstructures based upon poly(ethylene glycol) diacrylates, dimethacrylates, and tetraacrylates patterned photolithographically on silicon or glass substrates is described. A silicon/silicon dioxide surface was treated with 3-(trichlorosilyl)propyl methacrylate to form a self-assembled monolayer (SAM) with pendant acrylate groups. The SAM presence on the surface was verified using ellipsometry and time-of-flight secondary ion mass spectrometry. A solution containing an acrylated or methacrylated poly(ethylene glycol) derivative and a photoinitiator (2,2-dimethoxy-2-phenylacetophenone) was spin-coated onto the treated substrate, exposed to 365 nm ultraviolet light through a photomask, and developed with either toluene, water, or supercritical CO2. As a result of this process, three-dimensional, cross-linked PEG hydrogel microstructures were immobilized on the surface. Diameters of cylindrical array members were varied from 600 to 7 micrometers by the use of different photomasks, while height varied from 3 to 12 micrometers, depending on the molecular weight of the PEG macromer. In the case of 7 micrometers diameter elements, as many as 400 elements were reproducibly generated in a 1 mm2 square pattern. The resultant hydrogel patterns were hydrated for as long as 3 weeks without delamination from the substrate. In addition, micropatterning of different molecular weights of PEG was demonstrated. Arrays of hydrogel disks containing an immobilized protein conjugated to a pH sensitive fluorophore were also prepared. The pH sensitivity of the gel-immobilized dye was similar to that in an aqueous buffer, and no leaching of the dye-labeled protein from the hydrogel microstructure was observed over a 1 week period. Changes in fluorescence were also observed for immobilized fluorophore labeled acetylcholine esterase upon the addition of acetyl acholine.

A microwell array system for stem cell culture

“…For certain hydrogels, the degree of swelling can be predicted based on temperature and the average MW between crosslinks [41]. High MW PEG polymers are relatively diffusive, permitting rapid absorption of water.…”

Synthetic microfluidic paper: high surface area and high porosity polymer micropillar arrays

“…16 Moreover, low modulus polymer materials open up for new chemical groups, not readily available in highly cross-linked materials. Examples of such materials include photocurable PDMS, 17 polyacrylate hydrogels, 18 and the recently introduced Off-Stoichiometry-Thiol-Ene (OSTE), 19 a polymer system that enables excellent surface control due to inherently available functional groups on its surface.…”

Development of Hydrogel‐Based Keratoprostheses: A Materials Perspective

“…PEG is a biocompatible polymer used extensively in biomedical applications. It is soluble in aqueous solution and can be modified with photoreactive end groups to form macromonomers that, upon exposure to UV light, form crosslinked hydrogels with high equilibrium water content (30,82). PAA is an anionic polyelectrolyte that has been extensively investigated and has found wide use in biomedical applications as well as in "super-absorbent" infant diapers due to its impressive swelling properties.…”