Fabrication of environmentally friendly superhydrophobic coatings for corrosion protection under simulated conditions of antifreeze solutions for heat-source tower

Liu, Qingqing; Li, Nianping; Li, Chuanming; Duan, Jiaojiao

doi:10.1016/j.surfcoat.2023.129878

Cited by 2 publications

(1 citation statement)

References 54 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Therefore, the bio-friendliness of equipment materials must be addressed [5]. Applying a biofriendly and corrosion-resistant coating to mining equipment of combustible ice is often suggested as an effective and economical way of protecting such equipment [6].…”

Section: Introductionmentioning

confidence: 99%

Corrosion Behavior of Al2O3-40TiO2 Coating Deposited on 20MnNiMo Steel via Atmospheric Plasma Spraying in Hydrogen Sulfide Seawater Stress Environments

Zeng,

Chen,

Wang

et al. 2024

Coatings

View full text Add to dashboard Cite

In this study, an Al2O3-40TiO2 coating was deposited on 20MnNiMo steel via atmospheric plasma spraying. The corrosion behavior of the coating was investigated in both artificial seawater and a simulated environment with hydrogen sulfide and high pressure. Additionally, ion dissolution experiments were conducted to evaluate the coating’s bio-friendliness. In artificial seawater, the corrosion rate (based on the corrosion current) of the Al2O3-40TiO2 coating initially decreased before increasing. It was speculated that the blocking of corrosion products in the defect channels was helpful in delaying the progress of corrosion in the early stage. The coating had a corrosion current on the order of 10−6 A/cm2 in artificial seawater, suggesting good protection in conventional seawater environments. In the simulated environment, the corrosion rate (based on the weight loss) of the Al2O3-40TiO2 coating showed a continuously declining trend. It was deduced that, unlike corrosion products in artificial seawater, the corrosion products in the simulated environment (e.g., metal sulfide) might be more chemically stable, leading to a longer blocking effect. Therefore, a minimal corrosion rate of 0.0030 mm/a was obtained after the coating was immersed for 30 days. The amount of dissolved coated elements was negligible and there were only small amounts of dissolved non-coated elements such as Ni and Mo. The developed coating can be considered to be highly biofriendly if the non-coated area of the specimen is well sealed.

show abstract

Section: Introductionmentioning

confidence: 99%