Fabrication of bulk alumina structures with humidity sensing capabilities using direct ink write technique

Abstract

Purpose The purpose of this study is to evaluate different 3D structures for humidity sensing that will enable the fabrication of complex geometries with high moisture sensitivity. Design/methodology/approach Humidity sensors based on alumina ceramics were fabricated using direct ink write (DIW) technique. Different engineered surface area, polymer binder ratio and post-processing treatment were considered to increase moisture sensitivity. Findings It was found that the binder ratio plays an important role in controlling the rheology of the paste during printing and determining the pore size after post-processing treatment. The sensibility of the fabricated humidity sensor was investigated by measuring its capacitance response toward relative humidity (RH) varying from 40% to 90% RH at 25°C. It is shown that using 3D lattice design, printed alumina humidity sensor could improve sensitivity up to 31.6 pF/RH%, over an order of magnitude higher than solid alumina. Originality/value Most of the alumina humidity sensors available are films in nature because of manufacturing difficulties, which limited its potential of higher sensitivity, and thus broader applications. In this paper, a novel 3D alumina humidity sensor was fabricated using DIW 3D printing technology.

A review of Industry 4.0 and additive manufacturing synergy

“…The vast choice of fixed, near-field and mobile communications technologies available provide for data rates in the bit/s to Mbit/s as inferred for modern vehicles that are rapidly mutating to self-contained mobile clouds serving hundreds of sensors and actuators (Kanagachidambaresan et al , 2020; Qin et al , 2021; Renteria et al , 2021). In this situation, paralleled by home and office appliances along with many industrial plants and service industries, almost nothing connects directly to the internet via fixed-line or mobile connection as all information is aggregated and analysed locally prior to network connection when required (Lasi et al , 2014; Singh et al , 2021).…”

Challenges and limitation of wearable sensors used in firefighters’ protective clothing

“…Many types of sensing substances, such as ceramics, carbon nanosubstances and metal oxide semiconducting, polymers, and their composites, have been built and applied for moisture sensing usage. [113][114][115] Chen et al 116 made bilayer graphene applying chemical vapor deposition technique and found its electrical reaction to relative moisture. Based on their observations, the response gratitude of the sensor was about 98% RH.…”

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

“…One of the requirements for DIW is to obtain shear thinning behavior and a solidlike behavior under low shear rates to guarantee selfsupport after deposition during printing, which can be easily adaptable to printing composites [13]. However, one of the main drawbacks of DIW is the low resolution of the 3D printed parts due to the nature of the ink, which can be improved by controlling the rheological properties [14,15]. Another drawback of using DIW technique is that the samples require a post-treatment process to solidify, including thermal curing or photopolymerization.…”