Fabrication and investigation of graphene‐loaded triiron tetraoxide/silicone‐rubber electromagnetic shielding composites based on static magnetic‐field–induced orientation

Abstract

Graphene‐loaded triiron tetraoxide/silicone‐rubber composites containing highly loaded graphene‐loaded Fe3O4 (Fe3O4@RGO) particles were fabricated using static magnetic field‐induced alignment. The Fe3O4@RGO particles were characterized through Fourier transform infrared, x‐ray diffraction, SEM, and XPS analyses. Subsequently, the influence of added material and the strength of the magnetic field on the alignment distribution of the filler were examined through a synergistic combination of SEM and Raman spectroscopy. The electrical conductivity and electromagnetic shielding properties of the composites were assessed. The electrical conductivity of the composites increased with increasing filler addition, the 25 wt% filler mixture had the fastest curing rate and the maximum torque, and the continued increase in filler addition led to the occurrence of many defects. Concurrently, the alignment distribution of the filler progressively enhances with the augmentation of magnetic field strength. The composites synthesized at 180 mT exhibit the most substantial alignment, facilitating the establishment of effective conductive pathways. This results in a notable enhancement in electromagnetic shielding effectiveness, approximately 400% greater than that of pure silicone rubber and around 40% higher than that of non‐aligned composites. This approach introduces a novel concept for shaping the structural design of flexible electromagnetic shielding materials.Highlights Highly loaded Fe3O4@RGO was prepared by self‐assembly. The continuous phase structure of Fe3O4@RGO oriented was assessed. Fully oriented Fe3O4@RGO promotes the formation of conductive pathways. Fully oriented Fe3O4@RGO reduced the SER by 13% and increased the SEA by 67%.

Preparation of Conductive Silicone-Rubber Composites by Dynamic Magnetic Field-Induced Orientation of Ferrosoferric Oxide-Loaded Reduced Graphene Oxide

“…(c 1 ) Full spectrum of powder, (c 2 ) Fe 3 O 4 @RGO C 1s peak spectrogram, (c 3 ) Fe 3 O 4 @RGO O 1s peak spectrogram, and (c 4 ) Fe peak splitting spectrogram. Reproduced or adapted with permission from ref . Copyright 2024, John Wiley and Sons, Inc.…”

“…In order to analyze the results of Fe 3 O 4 loaded RGO more intuitively, we have placed the ATR-FTIR spectra, XRD and XPS of Fe 3 O 4 @RGO (which was published in our previous work 43 ) to help aid in the analysis. The functional groups of the products at different reaction stages were characterized by FTIR.…”