Extended finite element method for analysis of the acoustic emission response by a crack under moving heat source

Abstract

Purpose This paper aims to study acoustic emission (AE) propagation characteristics by a crack under a moving heat source, which mainly provides theoretical basis and method for the actual crack detection during welding process. Design/methodology/approach The paper studied the AE characteristics in welding using thermoelastic theory, which investigates the dynamical displacement field caused by a crack and the welding heating effect. In the calculation model, the crack initiation and extension are represented by moment tensor as the AE source, and the welding heat source is the Gauss heat flux distribution. The extended finite element method (XFEM) is implemented to calculate and solve the AE response of a thermoelastic plate with a crack during the welding heating effect. The wavelet transform is applied to the time–frequency analysis of the AE signals. Findings The paper provides insights about the changing rule of the acoustic radiation patterns influenced by the heating effect of the moving heat source and the AE signal characteristics in thermoelastic plate by different crack lengths and depths. It reveals that the time–frequency characteristics of the AE signals from the simulation are in good agreement with the theoretical ones. The energy ratio of the antisymmetric mode A0 to symmetric mode S0 is a valuable quantitative inductor to estimate the crack depth with a certain regularity. Research limitations/implications This paper mainly discusses the application of XFEM to calculate and analyze thermoelastic problems, and has presented few cases based on a specified configuration. Further work will focus on the calculation and analysis under different plate configurations and conditions, which is to obtain more interesting and general conclusions for guiding practice. Originality/value The paper is a successful application of XFEM to solve the problem of AE response of a crack in the dynamic welding inhomogeneous heating effect. The paper provides an effective way to obtain the AE signal characteristics in monitoring the welding crack.