Exponential Reaching Law and Sensorless DTC IM Control with Neural Network Online Parameters Estimation based on MRAS

Abstract

The most important problem in the control of induction machine (IM) is the change of its parameters, especially the stator resistance and rotor-time constant. The objective of<em> </em>this paper is to implement a new strategy in sensorless direct torque control (DTC) of an IM drive. The rotor flux based model reference adaptive system (MRAS) is used<em> </em>to estimate conjointly<em> </em>the rotor<em> </em>speed, the stator resistance and the inverse rotor time constant, the process of the estimation is performed on-line by a new MRAS-based artificial neural network (ANN) technique. Furthermore, the drive is complemented with a new exponential reaching law (ERL), based on the sliding mode control (SMC) to significantly improve the performances of the system control compared to the conventional SMC which is known to be susceptible to the annoying chattering phenomenon. An experimental investigation was carried out via the Matlab/Simulink with real time interface (RTI) and dSPACE (DS1104) board where the behavior of the proposed method was tested at different points of IM operation.

Detailed modelling and simulation of different DC motor types for research and educational purposes

“…) ) and ( 2) to (5). Taking the Laplace transform of these equations, considering the initial conditions to be zero, gives the following equations, which were put into block diagram form shown in Figure 8.…”