Exploring the mechanics of adhesion in metal cutting

Abstract

The deterioration of the cutting edge during machining influences production cost and productivity. The adhesion is one of the main wear mechanisms. This study delves into the adhesive mechanism in the context of turning, milling, and drilling, focusing on three different cutting materials: 34CrNiMo6, 1.437 stainless steel, and ductile iron. Building upon previous research on the adhesive process in turning, a dynamic model was developed to understand the mechanism further. The results showed that adhesion is a general phenomenon occurring in all tested work materials, but with varying intensity levels. Intermittent cuts did not greatly impact the adhesive mechanism, and cutting data, coolant, and chip breaking also showed little effect. However, the presence of graphite in ductile iron temporarily inhibited adhesion. The source of the adhesive sound was found to be the pivoting movement of the chip as it binds and rips off the cutting tool, leading to a frequency shift upon detachment. The adhesive wear was found to be a thermal mechanism, where chemical reactions between the SiO2 in the work material with the cutting tool caused thermal cracks and low-frequency fatigue.

Criteria for Evaluating the Tribological Effectiveness of 3D Roughness on Friction Surfaces

“…The adhesion-deformation or molecular-mechanical theory of friction and wear has been widely used to describe the mechanisms and causes of wear of rubbing surfaces [16]. According to this theory, the boundary layers of lubricant are almost solid bodies that are destroyed by tangential mechanical stresses and heat flows.…”