Exploiting the entire near-infrared spectral range to improve the detection of methane plumes with high-resolution imaging spectrometers

Abstract

Abstract. Remote sensing emerges as an important tool for the detection of methane plumes emitted by so-called point sources, which are common in the energy sector (e.g., oil and gas extraction and coal mining activities). In particular, satellite imaging spectroscopy missions covering the shortwave infrared part of the solar spectrum are very effective for this application. These instruments sample the methane absorption features at the spectral regions around 1700 and 2300 nm, which enables the retrieval of methane concentration enhancements per pixel. Data-driven retrieval methods, in particular those based on the matched filter concept, are widely used to produce maps of methane concentration enhancements from imaging spectroscopy data. Using these maps enables the detection of plumes and the subsequent identification of active sources. However, retrieval artifacts caused by particular surface components may sometimes appear as false plumes or disturbing elements in the methane maps, which complicates the identification of real plumes. In this work, we use a matched filter that exploits a wide spectral window (1000–2500 nm) instead of the usual 2100–2450 nm window with the aim of reducing the occurrence of retrieval artifacts and background noise. This enables a greater ability to discriminate between surface elements and methane. The improvement in plume detection is evaluated through an analysis derived from both simulated data and real data from areas including active point sources, such as the oil and gas (O&G) industry from San Joaquin Valley (US) and the coal mines from the Shanxi region (China). We use datasets from the Precursore IperSpettrale della Missione Applicativa (PRISMA) and the Environmental Mapping and Analysis Program (EnMAP) satellite imaging spectrometer missions and from the Airborne Visible/Infrared Imaging Spectrometer – Next Generation (AVIRIS-NG) instrument. We find that the interference with atmospheric carbon dioxide and water vapor is generally almost negligible, while co-emission or overlapping of these trace gases with methane plumes leads to a reduction in the retrieved concentration values. Attenuation will also occur in the case of methane emissions situated above surface structures that are associated with retrieval artifacts. The results show that the new approach is an optimal trade-off between the reduction in background noise and retrieval artifacts. This is illustrated by a comprehensive analysis in a PRISMA dataset with 15 identified plumes, where the output mask from an automatic detection algorithm shows an important reduction in the number of clusters not related to CH4 emissions.