Experiments and dynamic modeling of a reactive distillation column for the production of ethyl acetate by considering the heterogeneous catalyst pilot complexities

Fernandez, Mayra Figueiredo; Barroso, Benoît; Meyer, Xuân-Mi; Meyer, M.; Lann, Marie‐Véronique Le; Roux, G.; Brehelin, Mathias

doi:10.1016/j.cherd.2013.05.013

Cited by 11 publications

(1 citation statement)

References 26 publications

(24 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The equilibrium will be thus shifted to the products formation. In the literature, the most reported technique to achieve this goal is to use reactive distillation process (Hanika et al 1999;Lederer et al 2002;Arpornwichanop et al 2008;Fernandez et al 2013;Santaella et al 2015). Indeed, in the case of the synthesis of acetates using acetic acid, the reaction is rather complicated to handle as the esterification leads to the formation of an important quantity of water that will be difficult to separate from the acetate due to azeotropes formation (Gould 1973).…”

Section: Introductionmentioning

confidence: 99%

LCA case study: comparison between independent and coproduction pathways for the production of ethyl and n-butyl acetates

Bories

Barrera

Peydecastaing

et al. 2017

Int J Life Cycle Assess

View full text Add to dashboard Cite

Purpose The production of ethyl acetate and n-butyl acetate was investigated through two different pathways: either by independent reactions or by coproduction. In the coproduction pathway, the n-butyl acetate was produced by reusing the by-products of the synthesis of ethyl acetate. This study provides a comparison of the environmental impacts of these two pathways using a life cycle assessment (LCA). A discussion about the use of LCA on chemicals and its challenges was also developed. Methods Ethyl acetate and n-butyl acetate were synthesized with maximum respect to the principles of green chemistry (use of heterogeneous catalyst, energy savings, minimum steps). An innovative pathway was developed to avoid waste production, by reusing all the by-products of syntheses. After characterizing the feasibility of using these solvents in paint formulations, their potential impacts on the environment were evaluated through a cradle to gate analysis, up to the synthesis at laboratory scale. Most of the foreground data were directly collected with experimental trials. The background data that were not available in the Ecoinvent 3.1 database were estimated thanks to literature or proxys. Evaluations were then performed on the SimaPro 8.1.1 LCA software, using a derivative of ILCD 2011 1.05 as life cycle impact assessment methodology. Results and discussion The coproduction of both acetates led to the synthesis of purified ethyl acetate (purity of 92.1% w/w) and n-butyl acetate (purity of 97.1% w/w), after distillation. These results were quite similar to those obtained when independent syntheses were carried out. On an environmental point of view, it was found that the reagents preparation was always the step of the process responsible of the majority of the environmental impacts. The comparison between independent syntheses and coproduction showed that recycling the acetic acid produced during the first esterification (ethyl acetate from ethanol and acetic anhydride) led to a decrease of the impacts from 5 to 23% for all the impact categories. Conclusions This innovative coproduction of ethyl and n-butyl acetates led to interesting results from both a technical and environmental perspective, with a clear reduction of the environmental impacts. In a context of sustainable chemistry, this appears to be a very interesting way of production. Concerning the LCA of chemicals, a lot of work is still needed in order to improve the accuracy and the reliability of the assessment.

show abstract