Experimental Study on the Suspension Amount of Invasion Gas in Drilling Fluid with Yield Stress

Abstract

The gas suspension phenomenon caused by the yield stress of the drilling fluid affects the accurate calculation of wellbore pressure after gas invasion. At present, most studies on the bubble suspension in the yield stress fluid focus on the single-bubble suspension condition and there are few studies on the gas suspension concentration. This paper carried out the GSC (gas suspension concentration) experiment in the simulated drilling fluid, xanthan solution, with different gas invasion methods. The GSC in the drilling fluid under the conditions of diffuse gas invasion and differential pressure gas invasion was simulated by using two methods of stir-depressurization and continuous ventilation. The results showed that when the size of a single bubble satisfied the single-bubble suspension condition, multiple bubbles can be suspended at the same time. The GSC is affected by the average size of the suspended bubbles, the yield stress of the drilling fluid, and the gas invasion modes. For different gas invasion modes, the empirical models of critical GSC related to the dimensionless number Bi are established. Compared with the experimental data, the relative error of the critical GSC in diffuse gas invasion is less than 6% and the relative error of the critical GSC in differential pressure gas invasion is less than 10%. The results of this work can provide guiding significance for accurate calculation of wellbore pressure.

A drilling wellbore pressure calculation model considering the effect of gas dissolution and suspension

“…There are few studies on gas suspension concentration in the drilling fluid. Liu et al (2021) carried out the experiment of gas limit suspension concentration and found that the gas suspension phenomenon caused by the yield stress of the drilling fluid affected the accurate calculation of wellbore pressure after gas invasion. For different gas invasion modes, a method using dimensionless numbers to characterize the gas suspension concentration was proposed.…”