Experimental study on the effect of fission product gas release into blockage wake region using a simulated LMFBR fuel subassembly

The objective of the present study is to evaluate the temperature rise due to gas release behind local blockage in LMFBR fuel subassemblies.The experiments were conducted using six sets of electrically heated 37-, 61-and 91-pin bundles. The central or edge subchannels of each test section were blocked by a non-heat generating blockage of stainless steel plate. The effect of operational and geometrical conditions on the coolability of the blocked bundle were investigated from the test results. The examined factors are gas release rate, sodium flow rate, spacer type and blockage location.The high coolant flow more than 2 m / s in the velocity a t the blocked plane, forced the released gas to be accumulated within the recirculation region resulting in marked temperature increase. The dependency of the temperature rise on the gas release rate was classified into two stages; (1) the temperature increases with the gas release rate, (2) after reaching a peak value, the temperature gradually decreases with the gas release rate. From these conclusions empirical correlations were derived to estimate the temperature rise under the condition of blockage with gas release. It was deduced that fission gas release in an LMFBR fuel subassembly with a local blockage has a potential to cause a limited pin-to-pin failure propagation in the recirculation region.

show abstract

“…(6), and those using 37 GC and 37GE are in Ref. (7). Figure 3 reveals the typical axial temperature profiles behind blockage of 37GE.…”

Section: Overview Of Steady Gas Release Runsmentioning

confidence: 99%

Investigation of effect of gas release on coolability of locally blocked LMFBR fuel subassemblies.

Haga

Yamaguchi

Namekawa

1985

J. Nucl. Sci. Technol.

Self Cite

View full text Add to dashboard Cite

show abstract

Investigations of transitional and accident operating conditions in models of fast-reactor fuel-element bundles

Жуков¹,

Сорокин²,

Ушаков³

et al. 1992

At Energy

View full text Add to dashboard Cite

The blockage model of Upgraded Cheng and Todreas correlation for pressure drop in hexagonal wire-wrapped rod bundles

Chen

Hassan

2022

Nuclear Engineering and Design

View full text Add to dashboard Cite

Experimental study on the effect of fission product gas release into blockage wake region using a simulated LMFBR fuel subassembly

Cited by 5 publications

References 3 publications

Investigation of effect of gas release on coolability of locally blocked LMFBR fuel subassemblies.

Investigation of effect of gas release on coolability of locally blocked LMFBR fuel subassemblies.

Investigations of transitional and accident operating conditions in models of fast-reactor fuel-element bundles

The blockage model of Upgraded Cheng and Todreas correlation for pressure drop in hexagonal wire-wrapped rod bundles

Contact Info

Product

Resources

About