Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax

Abstract

Synthetic waxes produced by standard and registered processes may be used to manufacture Warm Mix Asphalt (WMA), which is a modified asphalt concrete produced, applied and compacted at temperatures below those typically required. This feature leads to environmental benefits, such as reduced energy consumption, gas and fume emissions, as well as to economic/operational advantages, such as lower production costs and greater hauling distances for extended construction seasons with tighter schedules. The present article serves to compare the mechanical performance of a WMA produced by adding synthetic wax with a traditional Hot Mix Asphalt (HMA) specimen, in terms of shear fatigue response and both complex and stiffness moduli. The experimental results and related modeling work demonstrate that adding synthetic wax into the WMA composition does not hinder either the destructive or non-destructive performance of an HMA, and this finding is corroborated by respectively measuring fatigue life and stiffness.

Influence of waxes on adhesion properties of bituminous binders

“…WMA benefits are well established in literature [18][19][20]. However, based on these results, performances are different from standard HMA mixtures.…”

Warm mix asphalt by water-containing methodology: a laboratory study on workability properties versus micro-foaming time

“…In fact, when the mixture cools they solidify into small particles increasing the stiffness of the binder. Three main processes pertain to this technology, with respect to the type of the organic wax used (D'Angelo et al 2008;Rubio et al 2012;Petit et al 2012):…”

Poliolefinen pirolisia iturri-ohantze konikoan

“…Horien onura asfaltoen prestaketa da, ohikoa baino tenperatura baxuagoan; hegakorren emisioaren ingurugiroko arazoak minimizatzen ditu. Gainera, ezkoen egitura kristalino bereziaren ondorioz [47], nahastearen nekearen kontrako erresistentzia eta gogortasun-propietateak hobetzen dira.…”