Experimental Study of the Wettability Characteristic of Thermally Treated Shale

Abstract

Extraction of shale gas from shale reservoirs is significantly affected by shale wettability. Recently, thermal recovery technologies (e.g., combustion) have been tested for shale gas recovery. This requires an understanding of the wettability change mechanism for thermally treated shale samples. In this study, the effect of combustion on shale wettability was investigated. Shale samples were first processed to obtain smooth surfaces and then combusted at temperatures of 200, 400, and 800 °C. The initial contact angles and dynamic behavior of water droplets on shale surfaces were recorded using the sessile drop method. It was found that pores and fractures were generated on the shale surfaces following high-temperature combustion. The pore volume and diameter increased with increasing combustion temperature, which improved the connectivity of hydrophilic pore networks. Compared to a raw shale sample, the shale sample combusted at 400 °C showed a smaller initial water contact angle and a more rapid decrease in the contact angle because of the oxidation of organic matter and generation of pore structures. Water droplets were found to completely spread over the surface of the shale sample combusted at 800 °C because of the generation of fractures. Moreover, the van der Waals potential between water droplets and combusted shale samples was determined to be stronger. However, the initial contact angle and dynamic behavior of water droplets did not show a significant change for the shale sample combusted at 200 °C. As a result, high-temperature combustion (≥400 °C) can be used to significantly improve the hydrophilicity of shale.

Integration of Bioglass Into PHBV-Constructed Tissue-Engineered Cartilages to Improve Chondrogenic Properties of Cartilage Progenitor Cells

“…The water contact angles of the nonporous PHBV and PHBV/10% Bioglass composite cuboids were evaluated to determine the hydrophilicity of the two kinds of scaffold composites. The sessile drop technique was used to evaluate the water contact angles at 25°C using a contact angle measuring instrument (SZ10-JC2000A, Shanghai, China) ( Yang et al, 2020 ).…”

Review of Developments in Nanotechnology Application for Formation Damage Control

“…Wettability performs a significant role in fluid displacement efficiency within porous systems during EOR. However, the change of wettability near the wellbore zone from water-wet to oil-wet can affect reservoir properties and the extraction of oil and gas and, consequently, induce formation damage. , This wettability alteration leads to a pressure drop and decline of oil permeability and restricts oil flow to the producing well.…”

Seepage Characteristics of Mixed-Wettability Porous Media on the Phase-Field Model

“…However, geological bodies are generally composed of multiple components, and different components exhibit different hydrophilic and hydrophobic properties. 11 Quartz, feldspar, and mica in rock reservoirs generally exhibit hydrophilic properties, while talc and metal sulfides exhibit hydrophobic properties. 12 The wettability of the coal reservoir matrix is related to the degree of metamorphism, 13 and its inclusions of clay exhibit strong hydrophilic properties, while hydrocarbon organic matter is hydrophobic.…”

“…Wettability can characterize the solid–gas–liquid interaction and determine the gas–water flow. However, geological bodies are generally composed of multiple components, and different components exhibit different hydrophilic and hydrophobic properties . Quartz, feldspar, and mica in rock reservoirs generally exhibit hydrophilic properties, while talc and metal sulfides exhibit hydrophobic properties .…”