Experimental Study of the Flexural Performance of GFRP-Reinforced Seawater Sea Sand Concrete Beams with Built-In GFRP Tubes

Abstract

The use of seawater sea sand concrete (SSSC) and fiber-reinforced polymer (FRP) has broad application prospect in island and coastal areas. However, the elastic modulus of FRP reinforcement is obviously lower than that of ordinary steel reinforcement, and the properties of SSSC are different from that of ordinary concrete, which results in a limit in the bearing capacity and stiffness of structures. In order to improve the flexural performance of FRP-reinforced SSSC beams, a novel SSSC beam with built-in glass FRP (GFRP) tubes was proposed in this study. Referring to many large-scale beam experiments, one specimen was used for one situation to illustrate the study considering costs and feasibility. Firstly, flexural performance tests of SSSC beams with GFRP tubes were conducted. Then, the effects of the GFRP tubes’ height, the strength grades of concrete inside and outside the GFRP tubes, and the GFRP reinforcement ratio on the flexural behaviors of the beams were investigated. In addition, the concept of capacity reserve was proposed to assess the ductility of the beams, and the interaction between the concrete outside the GFRP tube, the GFRP tube and concrete inside the tube was discussed. Finally, the formulas for the normal section bearing capacity of beams with built-in GFRP tubes were derived and verified. Compared to the beam without GFRP tubes, under the same conditions, the ultimate bearing capacities of the SSSC beam with 80 mm, 100, and 200 mm height GFRP tubes were increased by 17.67 kN, 24.52 kN, and 144.42 kN, respectively.