Experimental Study of Hot Spot Stress for Spatial CHS KK-Joints

Abstract

In offshore structures such as offshore wind turbine jacket foundations, prolonged exposure to wind and wave loads can lead to fatigue failure, especially at the joint connections. Currently, international codes primarily evaluate the fatigue performance of tubular joints using the hot spot stress (HSS) method, with stress concentration factor (SCF) being the most crucial parameter. Numerous studies have investigated the SCF of tubular joints and proposed corresponding calculation formulas. However, most of these studies have focused on simple basic loading cases. To comprehensively understand the distribution pattern of the HSS method at spatial tubular joints, this study selects the spatial CHS KK-joints as the research subject and performs the HSS testing on spatial KK-joints. The research indicates that, in CHS joints, the distribution of the HSS on the chord side remains consistent under tensile or compressive loading conditions along the brace axis. Additionally, within spatial joints, the loading conditions of neighboring braces near the reference brace significantly affect the distribution of HSS on the chord side and exhibit varying spatial effects on the SCF. Furthermore, this study applies recommended calculation formulas from codes to analyze the experimental results. The findings reveal significant discrepancies between the SCF calculation formulas recommended by CIDECT and the test results, rendering it inadequate for accurately calculating the SCF of spatial KK-joints. Therefore, further research is required to develop suitable calculation formulas for SCFs in spatial KK-joints.