Experimental Study of Entrainment and Mixing of Renewable Active Particles in Fluidized Beds

Abstract

Fluidized bed combustors were initially designed and built basically for the utilization of fossil fuels, mostly coal. The actual worldwide trend of transitioning from fossil fuels to renewables requires sufficient knowledge on the fluid mechanics of these new particle types because of the significant differences in their shapes, sizes, densities, and homogeneities. This article presents experimental results on the particle entrainment and mixing of some industrially relevant fuels such as solid refused fuel/refuse derived fuel (SRF/RDF), bark, sunflower shell, and wheat shell. The measurements were performed on a lab-scale fluidized bed experimental facility. The results show that sunflower shell is entrained in the highest degree; however, at very low velocity, the entrainment of wheat shell is the most intensive. The entrainment behaviors of the investigated SRF and bark samples are similar. On the other hand, the mixing results showed that the SRF has relatively high mass fractions in the bottom and centeral regions of the fluidized bed at low superficial velocities, while at elevated velocities, the entire mass of this fuel is shifted upwards. Interestingly, just the opposite tendency can be observed in cases of all other investigated biomass fuels. Finally, the nonspherical renewable active particles have markedly higher concentrations in the bottom region of the bed compared to spherical ones.