2014
DOI: 10.1016/j.ijheatmasstransfer.2014.07.059
|View full text |Cite
|
Sign up to set email alerts
|

Experimental study of Al2O3/water nanofluid turbulent heat transfer enhancement in the horizontal double pipes fitted with modified twisted tapes

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
3
1
1

Citation Types

1
22
0

Year Published

2015
2015
2020
2020

Publication Types

Select...
7
2

Relationship

0
9

Authors

Journals

citations
Cited by 102 publications
(23 citation statements)
references
References 45 publications
1
22
0
Order By: Relevance
“…were obtained by diluting the concentrated nanofluids with calculated amounts of deionized water. The corresponding volume concentrations are 0.56% vol., 1.02% vol., 1.5% vol., 1 nanofluid was mechanically mixed for 30 min, followed by ultrasonic oscillation for 4 h. Marginal sedimentation in the prepared Al 2 O 3 /water nanofluids was noticed after two weeks. The MWCNT suspension was purchased from Nanocyl, Belgium and prepared by dispersing 97% mass fraction MWCNTs in de-ionized (DI) water.…”
Section: Nanofluid Preparation and Propertiesmentioning
confidence: 99%
See 1 more Smart Citation
“…were obtained by diluting the concentrated nanofluids with calculated amounts of deionized water. The corresponding volume concentrations are 0.56% vol., 1.02% vol., 1.5% vol., 1 nanofluid was mechanically mixed for 30 min, followed by ultrasonic oscillation for 4 h. Marginal sedimentation in the prepared Al 2 O 3 /water nanofluids was noticed after two weeks. The MWCNT suspension was purchased from Nanocyl, Belgium and prepared by dispersing 97% mass fraction MWCNTs in de-ionized (DI) water.…”
Section: Nanofluid Preparation and Propertiesmentioning
confidence: 99%
“…Therefore, many efforts have been devoted to improving the heat transfer equipment design and enhancing the heat transfer performance of working fluids [1]. The plate heat exchanger (PHE) is widely used in many applications including food processing, heating and cooling applications and chemical industry for its high efficiency (high heat transfer coefficient) and compactness (low volume/surface ratio) [2,3].…”
Section: Introductionmentioning
confidence: 99%
“…39,40 In recent years, efforts have been made to enhance heat transfer performance of heat exchangers. The applied methods mostly include creation of turbulent flow, 41,42 use of fins, twisters, and baffles. [43][44][45] An obstacle in heat transfer improvement of heat exchangers is the limited thermal properties of conventional coolants.…”
Section: Inside Heat Exchangersmentioning
confidence: 99%
“…Despite, heat transfer enhanced for tubes with center cleared twisted tapes, because of applying a proper center clearance ratio. An experimental study of Al 2 O 3 -water nanofluid on turbulent heat transfer increment in horizontal double pipes fitted with modified twisted tapes was carried out by Maddah et al [14]. It indicated that by using the reducer geometrical progression ratio twisted tape, the friction factor and heat transfer coefficient both rises in compared with the tube with regular twisted tapes and nanofluids.…”
Section: Introductionmentioning
confidence: 99%