Experimental Study and Damage Model on the Seismic Behavior of Reinforced Concrete L-Shaped Columns under Combined Torsion

Abstract

Due to the advantage of saving indoor space, a special-shaped column frame attracted more attention of the engineers and researchers. This paper presented a quasi-static cyclic loading experiment of six specimens of reinforced concrete (RC) L-shaped columns under compression-flexure-shear-torsion combined loadings to investigate the effect in the ratio of torsion to moment (T/M) and axial compression ratio (n) on their seismic performance. The results showed that the failure modes of L-shaped specimens included bending failure, bending-torsion failure, and torsion-shear failure with the hysteretic curves exhibiting S shape. With the increase of T/M ratio, cracks on the flange developed more fully, and the height of plastic hinge decreased and torsion bearing capacity improved. Besides, as the T/M ratio increased the twist ductility increased, while displacement ductility decreased. On the other hand, with a higher axial compression ratio, torsion bearing capacity and bending stiffness were both increased. Moreover, the equivalent viscous damping coefficient of bending and torsion were 0.08~0.28 and 0.13~0.23, respectively. The average inter-story drift ratio met the requirements of the Chinese standard. Finally, two modified models were proposed to predict the progression of damage for the L-shaped column under combined loading including torsion.

Effects of Coal Gangue Coarse Aggregate on Seismic Behavior of Columns under Cyclic Loading

“…Coal gangue is essentially a kind of rock, which is similar to natural aggregate in terms of physical and chemical composition [11,12]. Using coal gangue as coarse aggregate partly or completely replacing natural aggregate to produce coal gangue concrete (CGC) will effectively reduce the mining amount of natural gravel [13][14][15]. Additionally, the application of CGC can also relieve the supply pressure of natural aggregate [16][17][18], which is one of the effective solutions to realize the sustainable development of the construction engineering.…”