Abstract:The article presents methods for determining the main parameters of a rotating atomizer sprayer. The choice of research methodology is justified based on the general pattern of liquid atomization by rotating atomizers, taking into account the influence of the air flow on them. The main indicators affecting the sprayed drops' dispersal are the air flow rate and the rotational speed of the pneumatic disk atomizer. Therefore, the correct choice of the method for determining the rotational speed ω of a pneumatic d… Show more
“…• the slats of the reel are increased with elastic material, the whip drum of the threshing apparatus is replaced with a pin drum • the lower part of the straw walker keys is covered with steel sheet slats When harvesting seeds with a pick-up grinder, the seed plants are preliminarily mowed into rolls and dried [8][9][10].…”
Section: The Degree Of Knowledge Of the Problemmentioning
The article presents the analysis of technical means for collecting seeds of desert pasture fodder plants. The type of technical means is chosen and the ways of its improvement are outlined. Information about the machine for implementing the technology is given. The material of the article reflects the specifics of the improvement of arid pastures.
“…• the slats of the reel are increased with elastic material, the whip drum of the threshing apparatus is replaced with a pin drum • the lower part of the straw walker keys is covered with steel sheet slats When harvesting seeds with a pick-up grinder, the seed plants are preliminarily mowed into rolls and dried [8][9][10].…”
Section: The Degree Of Knowledge Of the Problemmentioning
The article presents the analysis of technical means for collecting seeds of desert pasture fodder plants. The type of technical means is chosen and the ways of its improvement are outlined. Information about the machine for implementing the technology is given. The material of the article reflects the specifics of the improvement of arid pastures.
This article provides materials for the restoration and enhancement of degraded, low-yielding, and seasonally limited pastures, as well as an analysis of techniques for collecting seeds from desert-pasture forage plants. The primary objective of the study is to minimize seed losses during mechanized harvesting of desert fodder plants by enhancing the separation process from the crushed mass. Experimental tests have demonstrated that it is feasible to achieve the desired seed heap by positioning the reflector at an angle of 10-20° relative to the vertical. The results of experimental studies indicate that installing the reflector at an angle of 10-20° to the vertical allows for the acquisition of a seed heap at the required level.
The article presents the developed technological scheme of the ОВХ-600 fan cotton sprayer, to switch to a low-volume spraying method with flow rate of working fluid in the range of 50-100 liters per hectare. Conducted studies of the technological scheme sprayer show that to ensure agrotechnical requirements of the low-volume process spraying needs improvement system for supplying working fluid to the sprayer. That is, the supplied working fluid must be the most homogeneous and given volume. Solving these problems for installation on the sprayer flow diagram led installation of a self-cleaning filter and dispenser tap. For facilitating installation and dismantling of the sprayer, as well it is proposed to reduce non-operating costs completely mounted version of the fan sprayer, without special constructive changes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.