Experimental studies of adhesive joints in four-point static bending

Abstract

Abstract.A new type of specimens, being the subject of the patent application in Poland, was used in the studies. The sample consists of two beams: top one (longer) made of structural material such as steel, aluminium alloy and bottom one (shorter), which is part of the glass, which is tempered, layered or traditional glass. The top beam may have any cross-section, e.g. rectangular, square, c-shaped, etc., which is characterized by different values of the moment of inertia. The bottom beam, meanwhile, is made of rectangular glass. The tests were performed under four-point bending conditions at monotonic incremental bending moment values on the Instron 5965 durability machine. The sample allows bending tests to be performed at bending loads while maintaining a constant bending moment in the glued joint area. The new type of specimen has been developed to allow for the testing of glued joints of different structural rigidity, with special emphasis on the steel-glass, aluminum-glass, steel-aluminum and similar connections. The experimental study of the durability of adhesive joints under four-point bending conditions with the monotonic incremental bending moment allows to determine the values of stresses, whose value is related to initiation of damage of the tested joint.

Verification of Selected Failure Criteria for Adhesive Bonded Elements with Different Stiffness through the Use of Methacrylic Adhesive

“…Examples of experimental test results are included in the work carried out by [ 3 , 4 ]. Other non-standard research methods for adhesive joints are presented in the work carried out by [ 5 , 6 ]. They involve the application of a “sandwich”-type specimen which is subjected to four-point bending.…”