Experimental Research on Tensile-Shear Behavior of Spot-Welded Lap Joints of Ultra-High Strength Steel

Liu, Yue Hua; Hui, Yu; Wang, Wei; Li, Xiao Yang; Chen, Shu Jun

doi:10.4028/www.scientific.net/amm.226-228.1720

Cited by 1 publication

(1 citation statement)

References 4 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…According to the standard of BS EN ISO 14273-2001, a modified tensile-shear model as shown in Fig. 2 was applied, which contains two shims with the same thickness to ensure the center of the nugget and the load collinear [10]. Size of specimens and the position of the strain gauges are separately shown in Fig.…”

Section: Methodsmentioning

confidence: 99%

Experiment Research on Tensile-Shear Behavior of Spot-Welded Lap Joints of Ultra-High Strength Steel with Common Steel

Hui

et al. 2013

AMR

Self Cite

View full text Add to dashboard Cite

The welding spot of Ultra-high strength steel of 22MnB5 and common steel of St16 were the investigative objects, the intermediate frequency inverter & electric servo welding system was used to weld the sheets. Electrical measuring test method was used on spot-welded joint under tensile-shear load to determinate the strain of different positions, including the strain of weld nugget, the stain around the nugget and the base metals strain near the weld nugget. The deformation regularity of spot welding joints surrounding and base metal were analysed according to the data. The test provided a reference for the numerical simulation of spot welding model. Test results show that the strain distribution on spot welding joint is not uniform, the strain of the weld nugget center is relatively small, large deformation exists mainly in the heat affected zone. That is to say, the area near the spot-welding joint heat affected zone is prone to yield. The base metal area near the weld nugget is mainly affected by tensile strain, and the strain increases with the increasing of the load. The force condition of the specimen is complicated around the nugget, the relationship between the load and the strain is erratic. The strain of the weld nugget will gradually change from axial compressive strain to axial tensile strain. The strain of spot welding specimen made of dissimilar materials (22MnB5& ST16) is negative, and almost linearly.

show abstract

Section: Methodsmentioning

confidence: 99%