Experimental investigation on the performance and mesostructure of multi-material composite 3D-printed sand mold

Abstract

Purpose In this paper, the effects of the adhesive and curing agent contents on the tensile strength, bending strength, gas evolution and gas permeability of three-dimensional printed sand molds are studied. A strength model of the three-dimensional printed sand molds is proposed. The multi-material composite sand mold forming test is carried out. In addition, the mesostructure of the sand mold is studied. Design/methodology/approach The performances of three-dimensional printed sand mold such as tensile strength, bending strength, gas evolution and gas permeability are studied using the standard test methods. The mesostructure of the sand mold is studied by digital core technology. Findings A sand mold strength model based on the resin adhesive content, curing agent content and sand mold compactness are obtained. Two types of multi-material composite three-dimensional printed sand molds are proposed. An increase in the curing agent content in the sand mold widens the mesoscopic characteristic size distribution of the sand mold, and large-sized mesostructures appear, resulting in a decrease in the sand mold bearing capacity. Practical implications Process parameters that affect the performance of three-dimensional printed sand mold are revealed. The sand mold bearing curve provides a reference for the ultimate design of three-dimensional printed sand mold. Originality/value The paper deals with experimental work on the performance and mesostructure of multi-material composite three-dimensional printed sand mold with different contents of adhesive and curing agent. That gives a perspective on future designs of sand mold based on these principles.

Study on the Mechanical Properties of 3D-Printed Sand Mold Specimens with Complex Hollow Structures

“…Due to the low X- and Y-resolution of the furan droplets, the Z-direction permeability was consistently lower than the X-/Y-direction permeability. Guo et al [ 17 ] used standard test methods to investigate the gas permeability of 3D-printed sand molds. With an increase in the curing agent content, the gas permeability of the sand molds increased.…”

Research on forming method of additive manufacturing of frozen sand mold

“…Casting is an important and indispensable part of the development of the equipment manufacturing industry, and is an important support for the development of many hosts and major technical equipment [ [1] , [2] , [3] ]. Combining additive manufacturing with traditional casting technology can give full play to the technical advantages of additive manufacturing, can realize the integrated molding of sand mold and sand core.…”