Experimental Investigation on Hydrophobic Alteration of Mining Solid Waste Backfill Material

Abstract

To address the issues of corrosion weakening of solid-waste-based backfill material caused by mine water, a novel hydrophobic solid waste backfill (HSBF) material was developed using polydimethylsiloxane (PDMS) and a silane coupling agent (SCA) as hydrophobic modification additives, and NaOH (SH) and sodium silicate (SS) as alkali activators. Fly ash and slag were chosen as the primary raw solid waste materials. The rheological properties of the hydrophobic-treated backfill slurries were measured, and the resulting physicochemical properties were compared with the unmodified reference group. This study reveals that the fresh HSBF slurry follows a Modified Bingham (M-B) model with shear-thinning characteristics. The addition of PDMS causes an increase in the water contact angle of the hardened HSBF material with F8S2 to up to 134.9°, indicating high hydrophobicity. Morphological observations indicated that PDMS mainly attaches to the inorganic particles’ surface through the bridging action of SCA for the hydrophobic modification of the backfill material. The overall strength of the HSBF materials was further ensured via fly ash–slag ratio optimization, and was found to be enhanced up to 98% by increasing slag content from 20% to 50%. This is mainly attributed to the hydration of slag, forming C-S(A)-H gel, which contributes to the increased strength. The novel HSBF material enables the elimination of cement in mine backfilling applications, demonstrating good economic benefits. Its excellent mechanical and hydrophobic properties can not only prevent overburden displacement in goaf areas, but can also mitigate water resource loss from overlying strata and simultaneously reduce the safety risks associated with long-term mine water deterioration.