Experimental Investigation on Bragg Resonant Reflection of Waves by Porous Submerged Breakwaters on a Horizontal Seabed

Abstract

Submerged breakwaters based on Bragg resonance could be one of the measures used for mitigating marine disasters and coastal erosion in nearshore areas. Here, flume experiments were conducted to investigate the Bragg resonant reflection of waves propagating over porous submerged breakwaters. Furthermore, the influence of permeability, relative width, relative height, and section shapes of submerged breakwaters on Bragg resonant reflection were considered. This revealed that the Bragg resonant reflection coefficient increased with the decrease in permeability and increase in the relative height of submerged breakwaters. However, a slowing trend occurred when the Bragg resonant reflection coefficient peak decreased with the increase in permeability and increased with the increase in relative height. Moreover, the primary peak Bragg resonance increased with the increase in the relative width of submerged breakwaters in the range of 0.1–0.3. This was consistent with the numerical results of Ni and Teng (2021), to a certain extent, as the reflection coefficient first increased and then decreased with the relative bar width. In addition, rectangular submerged breakwaters demonstrated a better reflection effect than the trapezoidal submerged breakwaters, and the triangular submerged breakwaters demonstrated a poor reflection effect.

Numerical Investigation of the Seabed Dynamic Response to a Perforated Semi-Circular Breakwater

“…In addition, wave reflection can significantly impact the seabed dynamic response, potentially leading to severe coastal erosion [19]. Xu et al [20] conducted flume experiments to investigate the Bragg resonance reflection of wave propagation over submerged breakwaters. They discussed the influence of the permeability, relative width, relative height, and cross-sectional shapes of submerged breakwaters on Bragg resonance reflection.…”