Experimental investigation of the influence of mine water on mechanical properties of resin grout

Abstract

Resin grout is widely used in geotechnical and underground engineering, and is often affected by different mine water solutions. This study considered the effects of different mine water solutions and soaking times on resin grout. Soaking tests and uniaxial compression tests were conducted to investigate the changes in the solution pH, relative specimen mass, and uniaxial compressive strength (UCS), and the deterioration of the resin grout’s mechanical properties caused by the mine water solution was analyzed. The corrosion mechanism of resin grout under the action of different mine water solutions was investigated through scanning electron microscopy tests. The results reveal that the pH value of the solution and the relative mass of the specimen gradually stabilized as the soaking time was extended, and the final solution was weakly alkaline. The increase in the acidity and alkalinity of the solution and the extension of the soaking time led to a gradual decrease in the UCS and elastic modulus of resin grout under the action of mine water. As the soaking was prolonged, the resin grout properties deteriorated to different degrees and Poisson’s ratio increased. Moreover, owing to the different types and degrees of mine water action on resin grout in different mine water environments, the changes in the resin grout microstructure were also different. The defined damage parameters can express the damage process of the resin grout’s UCS quantitatively under the action of mine water solution. Finally, beneficial engineering application countermeasures are proposed for different resin grout types used in roadway support applications in coal mines.