Experimental investigation of the anchoring properties of special-shaped cross-section self-drilling bolts

Abstract

This paper designed a special-shaped cross-section hollow self-drilling bolt with discharge grooves, in which Mindlin’s solution of displacement was used in the elastic solution of a wholly grouted bolt. Theoretically, the ultimate pulling force and the residual pulling force were analyzed by considering the average distribution assumption of residual stress. The bolts’ performance with 2, 3, and 4 discharge grooves was compared with circular cross-section bolts, which experimental results are consistent with the theoretical results. The ultimate pulling force and the residual pulling force of the special-shaped cross-section bolt improved significantly according to the circular bolt. The bonding properties of special-shaped cross-section bolts present significant difference to circular section bolts. The residual pulling strength was contributed both by the bar-grout and grout-grout frictions. Upgrading the grout strength may further enhance the pulling strength of special-shaped cross-section bolts.