Experimental Investigation of Mechanical Properties of Problematic Expansive Soil using Copper Slag and Its Statistical Validation

Abstract

This experimental research has been conducted to improve the mechanical properties of the problematic expansive soil using copper slag. The copper slag has been utilized to improve the Talab soil in Nainwa for the first time. These mechanical properties are consistency limits, compaction, and strength properties. The swelling properties show that the collected soil has a high degree of expansive nature and low specific gravity. Therefore, the copper slag has been added to the soil from 5–30% at a 5% variation by its oven-dry weight. The experimental results reveal that the free swell index of soil has decreased by 69.88% with the addition of 30% copper slag. It has also been observed that the liquid and plastic limits have been decreased. The plastic limit of soil decreases because copper slag takes place in voids. Due to this phenomenon, the maximum dry density of soil has been increased by 14.75% with the addition of 25% copper slag. The California bearing ratio (CBR) value of soil has been increased to 1.13% (soaked condition) and 3.8% (unsoaked condition) by adding 25% copper slag. This research introduces an empirical relationship between unsoaked and soaked CBR with a determination coefficient (R2) of 0.8254. Moreover, it has been observed that the unconfined compressive strength of soil has increased by 51.68% with the addition of 25% copper slag. Moreover, the value of R2 for the experimental results obtained in this research is higher than the published experimental results, presenting the experimental study's accuracy and reliability. In addition, the analysis of variance (ANOVA) test accepts the research hypothesis for the present investigation.