Experimental Investigation and Discrete Element Modelling of Composite Hollow Spheres Subjected to Dynamic Fracture

Abstract

This paper deals with the characterization and the numerical modelling of the collapse of composite hollow spherical structures developed to absorb energy during high velocity impacts. The structure is composed of hollow spheres ( = 2-30 mm) made of epoxy resin and mineral powder. First of all, quasi-static and dynamic (V = 5 mm⋅min −1 to V = 2 m⋅s −1 ) compression tests are conducted at room temperature on a single sphere to study energy dissipation mechanisms. Fracture of the material appears to be predominant. A numerical model based on the discrete element method is investigated to simulate the single sphere crushing. The stress-strain-time relationship of the material based on the Ree-Eyring law is numerically implemented. The DEM modelling takes naturally into account the dynamic fracture and the crack path computed is close to the one observed experimentally in uniaxial compression. Eventually, high velocity impacts (V > 100 m⋅s −1 ) of a hollow sphere on a rigid surface are conducted with an air cannon. The numerical results are in good agreement with the experimental data and demonstrate the ability of the present model to correctly describe the mechanical behavior of brittle materials at high strain rate.

Tổng quan về phương pháp phần tử rời rạc (DEM) ứng dụng trong nghiên cứu vật liệu địa kỹ thuật

“…Coré et al (2017) đã mô phỏng quá trình nứt gãy động của vật liệu composite cấu trúc hình cầu rồng (HSS) bằng phương pháp DEM (Hình 4). Kết quả cho thấy đây là một cách thú vị để mô phỏng hành vi cơ học của vật liệu giòn.…”