Experimental Characterization of Metal Matrix Composite with Aluminium Matrix and Molybdenum Powders as Reinforcement

Arora, Amit; Astarita, Antonello; Boccarusso, Luca; Mahesh, V.P.

doi:10.1016/j.proeng.2016.11.694

Cited by 14 publications

(4 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Test result concluded that average hardness of composite was 75 to 88 Hv. Arora et al 40) have investigated the fabrication of Al/Mo composite through FSP. Mo particles were fully dispersed in Al matrix with the improvement in mechanical properties.…”

Section: State Of Artmentioning

confidence: 99%

An Overview of Recent Development and Application of Friction Stir Processing Technique

Maurya¹,

Maurya²,

Kumar³

2022

Evergreen

View full text Add to dashboard Cite

In current scenario, friction stir processing (FSP) is used for the development of surface composite. This process improves the grain refinement, which refines the localize grain size of the material near the stir zone. Owing to grain refinement, tensile strength and hardness of the material are significantly improved. Several studies have been reported related to research work performed by various researchers on FSP in the archival literature. The main emphasis of this study is to evaluate the mechanical properties investigated by the various researchers. This article presents the summary of research work performed on different types of material, reinforcement material used for the development of composite and application of FSP process.

show abstract

Section: State Of Artmentioning

confidence: 99%

An Overview of Recent Development and Application of Friction Stir Processing Technique

Maurya¹,

Maurya²,

Kumar³

2022

Evergreen

View full text Add to dashboard Cite

show abstract

“…The tensile test is carried out for finding value of yield point strength, ultimate tensile strength and elongation for the tested material [12]. Tests carried at room temp.…”

Section: Tensile Testsmentioning

confidence: 99%

Ansys Analysis and Study of Mechanical Properties for Aluminum Based LM25 Metal Matrix Composite Fabricated with Conventional Method

Mehta

Vadher

2022

Advances in Transdisciplinary Engineering

View full text Add to dashboard Cite

Metal matrix composites with aluminum as base metal are extensively used in the important engineering industries, their properties can be improved for many important requirements. In current work it is tried to make the process cost effective. The efforts are made to make less expensive composites with improved properties. In this work a attempt is made to fabricate Aluminum LM25 based Metal Matrix Composite with the aim of developing a low cost conventional method for manufacturing of Metal Matrix Composites. The different combinations for LM25-Fe3O4 are made and their mechanical properties are tested and studied on alloy wheel with Ansys software. Experiments done for various combinations for LM25 and Fe3O4 as reinforce material (2.5%, 5% and 7.5% by weight) then examined for important mechanical properties. The present work also shows Ansys analysis on the alloy wheel of car with all new combinations of LM25 and Fe3O4 and to predict effect of loading. The effect of change in combination is also shown on alloy wheel of an automobile with Ansys software.

show abstract

“…Due to the high pressure level in the squeeze casting process, there is a refinement in the microstructure with the combined impact of undercooling and a greater cooling rate. Mechanical characteristics are enhanced for both alloys and composites when manufactured using the squeeze casting technique under regulated process settings [16]. FSP was used to create superficial Al-Mo MMC.…”

Section: Introductionmentioning

confidence: 99%

Mechanical and Morphological Investigation of Aluminium 7075 Reinforced with Nano Graphene / Aluminium Oxide / Inconel Alloy 625 Using Ultrasonic Stir Casting Method

Mahenran¹,

Rajammal²

2022

RCMA

View full text Add to dashboard Cite

Aluminium Hybrid Metal Matrix Nano Composites (AHMMNCs) are finding widespread use in the aerospace, marine, defence, and automotive industries due to its high stiffness, high strength-to-weight ratio, and outstanding wear resistance. Hybrid nano composite materials are commonly used in engineering applications due to their proper mechanical organisation. Mechanical property improvement of hybrid nano composites is now a prominent field of research in materials and industrial technology. Aluminium alloy 7075 was reinforced with 0.5, 1.5%, and 2.0 wt. percent of nano-graphene (20-30nm), 2,4,6,8 wt percent of aluminium oxide (50m), and 2,4,6,8 wt percent of Inconel alloy 625 and 1wt percent of magnesium utilising an ultrasonic stir casting process in this study. Mechanical characteristics of the hybrid nano-composite material were evaluated using tension, compression, hardness, and flexural tests. SEM was used for morphology inquiry examination.

show abstract

Experimental Characterization of Metal Matrix Composite with Aluminium Matrix and Molybdenum Powders as Reinforcement

Cited by 14 publications

References 7 publications

An Overview of Recent Development and Application of Friction Stir Processing Technique

An Overview of Recent Development and Application of Friction Stir Processing Technique

Ansys Analysis and Study of Mechanical Properties for Aluminum Based LM25 Metal Matrix Composite Fabricated with Conventional Method

Mechanical and Morphological Investigation of Aluminium 7075 Reinforced with Nano Graphene / Aluminium Oxide / Inconel Alloy 625 Using Ultrasonic Stir Casting Method

Contact Info

Product

Resources

About