Experimental assessment of ignition characteristics of lubricating oil sprays related to low-speed pre-ignition (LSPI)

Abstract

Low-speed pre-ignition (LSPI) remains one of the challenges of Direct Injection (DI) Spark Ignition (SI) engines due to its potential to induce a heavy knock. Several mechanisms have been identified in the literature as plausible causes for LSPI. The physical and chemical properties of lubricant oils play a role on some of these causes. The present work aims at getting an independent procedure to determine the proneness of lubricant oils to ignite. To this end, the ignition delay (ID) of different oil formulations is experimentally determined in a constant-pressure flow facility through two different optical techniques: Schlieren and OH* chemiluminescence imaging. The investigation explores the effect of base-stock formulation, oil specification quality level, different additive types content, aging, and oxidation on oil reactivity for several thermodynamic conditions. Differences in ignition delay were found among base stocks, correlating with the American Petroleum Institute (API) group classification. However, no significant differences were found among additive packages previously reported to yield different LSPI occurrences. Hence, differences in reactivity among lubricating oil formulations are not the determining factor explaining their different LSPI occurrences in an engine. Similarly, specific lubricant additive content, aging, and oxidation do not importantly modify the measured ignition delay.