Experimental and Numerical Study on the Combined Jet Impingement and Film Cooling of an Aero-Engine Afterburner Section

Abstract

The recent advancement of cooling methodologies for critical components such as turbine blades, combustor liners, and afterburner liners has led to the development of a combination of impingement and film cooling. The present study proposes an efficient cooling technique for a modern aero-engine afterburner liner based on the combination of jet impingement and film cooling. To achieve this, a numerical model is devised to model the film flow over a corrugated liner with several jets impinging over it. The numerical model is validated in a set of in-house experiments as well as against experimental data available in the literature. The experiment is performed for a limited temperature range (i.e., with a low-density ratio). However, the numerical simulations are carried out by varying the blowing ratio from 0.3 to 0.6. The density ratio during the simulations is kept at 3.5. The minimum distance between the impinging plate and the liner is kept at h/D = 1. A detailed analysis of the numerical results indicates a significant drop in the temperature distribution over the liner surface because of the employed cooling technique. The present study also reveals that, under similar operating conditions, the combined jet impingement and film cooling system has the ability to achieve the targeted cooling effect at a lower bleed air flow rate due to its higher effectiveness than that of the standard film cooling arrangement.

Flow Characteristics of Liquid Jet in Transverse Shear Crossflow

“…Zhou [15] analyzed the evolution process of the jet surface waves at different disturbance frequencies and the coupling effect of the jet tip and liquid core on the overall spray field from overall structure, liquid ligament, and droplet formation. Singh [16] proposed an efficient cooling technique for a modern aero-engine afterburner liner based on the combination of jet impingement and film cooling based on jet impinging. In recent years, researchers have conducted some research on jet flow in transverse shear airflow.…”