Experimental and Numerical Study of Multiphase Mixing Hydrodynamics in Batch Stirred Tank Applied to Ammoniacal Thiosulphate Leaching of Gold

Abstract

Hydrodynamics of aerated slurry is studied experimentally and numerically using the example of thiosulphate leaching of gold concentrate. The studied milled concentrate has shear-thinning fluid rheology and it was imitated by water-based solutions of CMC. Presence of electrolytes, as in the case of the leaching slurry, has great influence on bubble size distribution. Primary phase flow is measured by Particle Image Velocimetry. Local gas hold-up in aerated CMC 50000 (0.15 w%) solution is measured by Electrical Impedance Tomography. Volumetric mass transfer is measured by dynamic method in different CMC solutions over a range of operational conditions in absence and presence of electrolytes. The experimental data was used in CFD modelling of the aerated slurry. Single phase hydrodynamics of shear-thinning fluid (CMC 50000 (0.15 w%)) have been modelled and validated against experimental data with reasonable agreement. Multiphase mixing of the thiosulphate slurry was modelled with the assumption of constant bubble size. The results of the simulations and measurements are presented and discussed.

Numerical Simulation of Biomass Growth in OKTOP®9000 Reactor at Industrial Scale

“…Mixing in the draft tube reactor was modeled using the multiple reference frame (MRF) method where the rotor is fixed, around which the fluid in the mixing zone is rotated. The method allows steady state simulation at accuracy comparable to the sliding mesh (SM) method as proved by Joshi et al In the works published previously, , the MRF approach in combination with the Realizable k-e turbulent model simulated flow characteristics in a STR accurately close to PIV measurements. Moreover, the results of the sliding mesh approach are not sufficiently verified in turbulent and multiphase mixing flows …”

Auto-Aspirated DAF Sparger Study on Flow Hydrodynamics, Bubble Generation and Aeration Efficiency

“…The pressure drop measured using an in-line pressure gauge was used to find power consumption of the pump. The aeration feasibility of the system was compared with the available gas-liquid contactors of a similar scale that have been studied previously in our lab; namely, a flat-bottomed stirred tank reactor [22], air-lift reactor [23], and the draft-tube stirred tank reactor [24]. More details are available in the stipulated references.…”

Ultrasound tomography enhancement by signal feature extraction with modular machine learning method

“…IPT is widely used in the monitoring and visualization of closed industrial pipelines and industrial reactors. It is mainly applied in the refining, food, and pharmaceutical industries and in municipal service facilities such as sewage treatment plants [11][12][13][14][15]. IPT deals with very complex problems aimed at monitoring and then optimizing technological processes using various measurement methods, including X-ray diffraction tomography [16] or microtomography [17], electrical resistance [18] and electrical capacitance tomography [19].…”