Experimental and Field Data Analyses of Ball-Sealer Diversion

Abstract

Diversion methods are routinely used in both matrix-acidizing and fracturing-stimulation treatments. The diversion methods are categorized into chemical diversion and mechanical diversion. In this study, we focus on one of the classical mechanical-diversion methods, ball sealers. Ball-sealer diversion is used in cased and perforated wells to divert stimulation fluids by temporarily blocking perforation holes in the casing with rubber-coated balls. This diversion method can be very effective, particularly with highrate injection, but no general methodology is available to design ball-sealer diversion, or to evaluate its effectiveness from the treating rate and pressure record.Although some design methodologies, such as the use of buoyant ball sealers to improve the ball-sealer efficiency, have been suggested, no model has been presented for determining how many balls seat on the perforations. In this paper, experimental data from an extensive series of full-scale flow experiments conducted by Bern (1993) and Bern and Lewis (1992a, b) were analyzed. We summarized several features of the ball sealers which are not presented in the literature. Also we used the procedure presented by Brown et al. (1963) to evaluate the statistical nature of the ball behavior in the experimental results. The experiments were designed to minimize the scatter of data. However, the seating process was found to still be statistical. We developed an empirical correlation for ball-sealer performance on the basis of the experiments.We also analyzed one field acid-fracturing treatment where ball sealers were used as a diversion method. The analyzed data were then compared to the experimental results. A similar trend in seating behavior was observed.

Mechanical Study and Key Parameter Optimization of Temporary Plugging Fracturing in Tight Reservoirs

“…The study of the mechanical state of the sealing balls during layered fracturing construction determines the direction of parameter optimization, which is closely associated with the success or failure of the fracturing process [10][11][12][13][14][15][16]. This chapter aims to investigate the influence of various factors on the force on the jammed sphere and to identify the main controlling factors for the effects of pitch and stratification fracturing.…”