Experimental analysis of the effect of copper dimple tube with aluminum coating on the performance of parabolic solar water heater using helically twisted tape

Abstract

In this research, a parabolic trough solar water heater (PTSWH) having helically twisted copper tubes and dimple texturing with an aluminum (AlC) coat was experimentally examined to identify the solar collector’s efficiency, friction factor, convective heat transfer, Nusselt numbers variations, and uncertainty during the test. For this purpose, helical copper dimple tubes with Al coating were used to pass water through it at mass flow rates of 0.5–2.5 kg/min, with 0.5 kg/min increments. Experimental tests were conducted using specific datasets to investigate the efficacy of PTSWH. These experiments aimed to evaluate the efficiency and performance of solar collectors in harnessing solar energy for various applications, such as space heating, water heating, and industrial processes. The results of these experiments are recorded and analyzed to assess the practical viability of solar thermal systems. The results showed that solar collector effectiveness was improved by about 31.2% at flow rates of 1.5 kg/min, while the friction factor was raised by approximately 0.23%. The convective heat transfer coefficient was enhanced by about 7%, and the Nusselt numbers were enhanced to nearly 298. The overall uncertainty of ±2.3% was also observed, indicating that the findings were within the permissible range. Moreover, the PTSWH system recorded an elevated pressure drop of 2.32 kPa. This approach of dimple texturing with Al coating may be best suited for the PTSWHs used in moderate and low solar intensity regions.