Experimental analysis and modelling of textile transmission line for wearable applications

Abstract

Purpose -The paper seeks, by means of measurement and modelling, to evaluate frequency dependent per-unit-length parameters of conductive textile transmission line (CTTL) for wearable applications and to study deterioration of these parameters when CTTL is subjected to washing. Design/methodology/approach -The studied transmission line is made of Nickel/Copper (Ni/Cu) plated polyester ripstop fabric and is subjected to standard 608C cycle in a commercial off-the-shelf washing machine. The per-unit-length parameters (resistance and inductance) and characteristic impedance of the line are extracted from measurements before and after washing. Using the measurement data an equivalent circuit is created to model the degradation of the line. The circuit is then integrated in a three-dimensional transmission line matrix (TLM) model of the transmission line. Findings -Both an electrical equivalent circuit and a TLM model are developed describing the degradation of the conductive textile when washed. A severe deterioration of the electrical parameters of the line is noticed. Experimental and modelling results are in good agreement in the addressed frequency band. Research limitations/implications -Analysis is performed for frequencies up to 10 MHz. The developed TLM model can be used to conduct parametric studies of the CTTL. To counteract the degradation of the line, protective coating is to be considered in further studies. Originality/value -This paper extends knowledge of the subject by experimental and simulation-based characterization of the CTTL when subjected to washing cycles.

Smartware electrodes for ECG measurements : Design, evaluation and signal processing

“…Nowadays, these fibers are used in several technological domains such as electrical signal transmission and power supply [17]. Conductive textile materials can be used for replacing metals in many applications where the special properties of textiles are preferred to those of metal conductors.…”

Changes in the Characteristic Impedance of Textile Signal Lines While Mechanically Loaded

“…Because of the wide range of potential applications of TSLs, the work on them is nowadays carried out by many researchers [12][13][14][15][16][17]. These conditions can cause, for example, mechanical deformation, changes in the properties of the line under the influence of temperature and humidity, or the presence of human sweat.…”

Stitched transmission lines for wearable RF devices

“…People constantly wear apparels and are continuously surrounded with textiles in virtually all of our environments. The integration of multifunctional values in such an universal material has become a special area of interest in recent years and with rapid advances in civilian and military applications for wearables, it is imperative that in designing such apparels that design requirements such as the operational reliability, controllability, convenience, ergonomics, and robustness have to be met in order to meet the desires of the target consumers .…”