Expanding Lightweight Design Potential by Hybrid Joining of Aluminum Sheets with Aluminum Casting Through Compound Sand Casting and Induction Heating

Abstract

Combining light metals like aluminum to produce lightweight structures offers a high weight‐saving and contributes to a circular economy in automotive car body construction. Compound casting is a promising process for producing car body parts. Difficulties arise in creating metallic continuity between insert and casting. Insert coatings are used to remove the oxide layer and thereby improve the wettability of the melt. This study uses a hybrid joining method to improve the metallic bond between insert and casting. Induction heating differently influences the strength properties of age‐ and nonage‐hardenable inserts. Compression shear tests characterize the metallic bond strength. Microscopic images show the influence of the process variables on the compound quality. Reproducible sound metallic bonding with low scattering is achieved by enhancing the compound casting process through induction and no insert coating. Cast wall thicknesses down to 4 mm contribute to further lightweight potential as they have the same strength level as the reference sample. A decisive factor is the insert temperature in the compound zone. Thereby, insert preheating conditions play a crucial role. Additional heat treatment of hardenable compounds leads to a further increase in metallic bond strength.