Ex Vivo Comparison of a UV-Polymerizable Methacrylate Adhesive versus an Inverting Pattern as the Second Layer of a Two-Layer Hand-Sewn Jejunal Anastomosis in Horses: A Pilot Study

Abstract

Resection and anastomosis of small intestine during colic can lead to adhesions and recurrent colic. Several methods are available to reduce the rate of adhesions in the postoperative period, such as the use of serosal barriers. Surgical glues form a smooth surface, are fast to apply, and could reduce surgery time when performing anastomosis. A recently developed UV-polymerizable methacrylate adhesive (UV-PMA) is designed to anchor into the biological tissues’ top surface offering sealant and a smooth cover over the anastomosis site. This adhesive was used ex vivo on fifteen samples of equine jejunum as the second layer of a two-layer anastomosis (1L-UV-PMA group) and compared to a two-layer anastomosis (simple continuous pattern covered with a Cushing pattern; 2L-CT group), in terms of feasibility, bursting strength pressure (BSP), luminal diameter reduction (LDR), and time of construction. Data were analysed using a paired t-test or a chi2-test ( P < 0.05 ). The results showed no statistical difference in BSP, LDR, or any mode of failure between the two anastomosis types. However, the glue anastomosis formed a tunnel-like anastomosis and shredded under pressure, before apparition of leakage, preventing its usage in clinical cases with this methodology. It was concluded that modification of the technique is warranted before testing in clinical cases. A preprint of a former version of the manuscript is available on researchsquare.com, which was not conducted to print and publication after peer reviewing. Since then, the manuscript has been modified to this current version.