2014
DOI: 10.1016/j.egypro.2014.11.102
|View full text |Cite
|
Sign up to set email alerts
|

Evaluation of Reclaimer Sludge Disposal from Post-combustion CO2 Capture

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
2
1
1
1

Citation Types

1
17
0

Year Published

2015
2015
2023
2023

Publication Types

Select...
5
4
1

Relationship

0
10

Authors

Journals

citations
Cited by 30 publications
(24 citation statements)
references
References 0 publications
1
17
0
Order By: Relevance
“…Amines have moderate working capacities for CO 2 and sufficiently low vapor pressure to enable practical designs but are imperfect from an environmental and health perspective , and are susceptible to thermal, , oxidative, and contaminants-based , degradation. Amines react with SO x and NO x to form stable salts in the liquid phase, some of which may be hazardous. , Reclamation technologies ,, are well developed to recover the contaminated amines, but for CO 2 capture to be cost effective, the contaminants should be removed in an upstream acid gas treatment , or in a sacrificial section of the absorber . The primary issue that has held back the larger-scale deployment of amines, however, and by extension carbon capture technologies more generally, is the high energy demand associated with regenerating the amine and releasing high purity CO 2 in the desorber. ,, Demixing sorbents phase separate into CO 2 -rich and CO 2 -lean phases, and by passing only the CO 2 -rich phase to the desorber, a more efficient process may be possible.…”
Section: Sorbent Materialsmentioning
confidence: 99%
“…Amines have moderate working capacities for CO 2 and sufficiently low vapor pressure to enable practical designs but are imperfect from an environmental and health perspective , and are susceptible to thermal, , oxidative, and contaminants-based , degradation. Amines react with SO x and NO x to form stable salts in the liquid phase, some of which may be hazardous. , Reclamation technologies ,, are well developed to recover the contaminated amines, but for CO 2 capture to be cost effective, the contaminants should be removed in an upstream acid gas treatment , or in a sacrificial section of the absorber . The primary issue that has held back the larger-scale deployment of amines, however, and by extension carbon capture technologies more generally, is the high energy demand associated with regenerating the amine and releasing high purity CO 2 in the desorber. ,, Demixing sorbents phase separate into CO 2 -rich and CO 2 -lean phases, and by passing only the CO 2 -rich phase to the desorber, a more efficient process may be possible.…”
Section: Sorbent Materialsmentioning
confidence: 99%
“…The adopted design in this study assumes that the reclaimer slipstream is purged on the discharge section of the lean solvent pump and the reclaimed amine returns on the suction section of the lean solvent pump. The mass balance considers a slipstream of 0.1 wt.% of the total circulation rate (Sexton et al, 2014).…”
Section: Reference Casementioning
confidence: 99%
“…A PCC plant's operations are not known to be affected by Hg. However, the presence of Hg in the degraded amine waste may make it hazardous (Sexton et al, 2014), necessitating expensive treatment procedures for safe disposal. To avoid this cost, minimization of Hg in the flue gas would be a necessary step.…”
Section: -Feron-9780081005149mentioning
confidence: 99%