Evaluation of Drive Cycle-Based Traction Motor Design Strategies Using Gradient Optimisation

Abstract

In this paper, two design optimisation methods are evaluated using gradient-based optimisation for electric vehicle traction applications. A driving cycle-based approach is used to evaluate specific operational points for the design optimisation procedure. To determine the operational points, an energy centre of gravity (ECG) approach is used. Both optimisation methods are described, namely the point based method and the flux mapping method, with a focus on the flux mapping procedure. Within the flux mapping approach, an inner optimisation loop is defined in order to maintain the stability of gradient calculation for the gradient-based optimisation. An emphasis is placed on the importance of how the optimisation problem is defined, in terms of the objective function and constraints, and how it affects a gradient based optimisation. Based on a design case study conducted in the paper, it is found that the point-based strategy realised motor designs with a slightly lower overall cost (5.66% lower than that of the flux mapping strategy with 8 ECG points), whereas the flux mapping strategy found motor designs with a lower input energy (1.48% lower than that of the point-based strategy with 8 ECG points). This may be attributed to the difference in the definition and interpretation of constraints between these two methods. It is also shown that including more operational points from the driving cycle in the design optimisation leads to designs with reduced total input energy and thus better drive-cycle energy efficiency. This paper further illustrates the significant computational advantages of a gradient-based optimisation over a global optimisation method as it can be completed within a fraction of the time while still finding a global optimum, as long as the problem definition is correctly determined.

Prospect of PM Vernier Machine for Wind Power Application

“…Although gradient-based algorithms are time efficient for electrical machine design with many design variables, they are susceptible to becoming trapped into a local optimum and numerical noise [38]. On the other hand, non-gradient-based algorithms are proven to have capabilities of locating the global optimum point, but they are computationally very expensive.…”

Optimization-Based Design Model for Electric Traction Motors Considering the Supply Risk of Critical Materials

“…2b). To determine the representative OPs from the drive cycle, the energy center of gravity (ECG) was used [25]. The torque-speed diagram is divided into clusters, and the ECG are localized and estimated for each cluster.…”

Guyana’s Transition to Electric Vehicles: a Systematic Review from the Perspective of Developing Countries (Paper 562)

“…EVs undergo similar safety and test procedures to fossil fuel powered cars (Rinkesh, 2016). An E4W is safer to drive given the lower centre of gravity (CG), which makes the vehicle more stable on the road in the case of a collision (Pastellides et al, 2022). In the event of an accident, the electricity supply from the battery will cease or stop.…”