Evaluating the Performance of Aluminum Oxide Nanoparticle-Modified Asphalt Binder and Modelling the Viscoelastic Properties by Using Artificial Neural Networks and Support Vector Machines

Abstract

The effect of aluminum oxide nanoparticles (Al2O3) on the 60/70 penetration of asphalt cement (AC) was investigated in terms of the physical and rheological characteristics by using the Superpave testing procedures. Al2O3 at 3, 5, and 7% concentrations were blended with 60/70 penetration of grade AC. Conventional testing procedures were adopted regarding the physical characteristics, while dynamic shear rheometer (DSR) testing procedures were conducted to evaluate the high and low temperature failure parameters. In addition, heuristic modelling techniques, artificial neural networks (ANN), and support vector machines (SVM) were employed to predict the performance characteristics of AC by using the mechanical testing conditions. The frequency sweep test and multiple stress creep recovery (MSCR) test results revealed that the optimum composition of Al2O3 was at 5% concentration considering the high temperature performance characteristics since further addition of the Al2O3 resulted in degradation in the enhanced properties due to agglomeration of the nanoparticles in the blend. On the contrary, Al2O3 5% demonstrated the lowest viscoelastic behavior at intermediate temperatures. The higher complex modulus ( G ∗ ) and lower phase angle ( δ ) parameters indicated that the increase in stiffness due to the modification process was at the cost of losing elastic properties against fatigue cracking. Moreover, based on the statistical performance indicator, coefficient of determination (R2), it was observed that the ANN models for predicting G ∗ and δ achieved a prediction accuracy of 0.989 and 0.911 while SVM models were able to achieve 0.984 and 0.929, respectively, considering the training datasets. On the other hand, it was noted that SVM models outperformed the ANN models in terms of a smaller gap between the results obtained from the training and testing datasets. The difference between the training and testing datasets for G ∗ and δ parameters for the SVM models were 3.2% and 6.8% while for the ANN models, the differences were 11.6% and 9.5%, respectively, indicating that the ANN models were more prone to the overfitting phenomenon.