Evaluating the Environmental Fate of a Variety of Types of Chemicals Using the Eqc Model

Abstract

Abstract-The multimedia equilibrium criterion model, which can be used to evaluate the environmental fate of a variety of chemicals, is described. The model treats chemicals that fall into three categories. In the first the chemicals may partition into all environmental media, in the second they are involatile, and in the third they are insoluble in water. The structure of the model, the process equations, and the required input data for each chemical type are described. By undertaking a sequence of level I, II, and III calculations, increasing information is obtained about the chemical's partitioning, its susceptibility to transformation and transport, and the environmental process and the chemical characteristics that most influence chemical fate. Output data, consisting of tables and charts, give a complete picture of the chemical's fate in an evaluative or generic environment. The model is illustrated by applying it to two chemicals, pyrene, which is a chemical of the first type, and lead, which is of a second type. The role of this model as a tool for assessing the fate of new and existing chemicals is discussed.

Fate and distribution modelling of metals in life cycle impact assessment

“…Since all significant metal species are either ions or complexes hereoff, all metal species included in the RCMM are assigned a hypothetical low vapour pressure of 1 × 10 −11 Pa (as presented by Mackay et al, 1996), due to the fact that none of these species distributes significantly into the atmospheric compartment. However, there are metalloid and metal species which are volatile (e.g.…”

“…Since metals are non-degradable elements, all metal species are assigned a hypothetical high degradation half-life value of 1 × 10 12 h based on the value set for Pb as presented in Mackay et al (1996). For the bioavailable metal molecules, this half-life should be interpreted as the average time they remain bioavailable after emission.…”

Guidance on the Selection of Efficient Computational Methods for Multimedia Fate Models

“…Most of the initial MFMs 1,2 were based on the definition of well mixed standard compartments, such as air, soil, water and sediment, and were simple steady state partitioning models with a fixed environmental scenario. [3][4][5][6] Many MFMs then evolved towards unsteady state or dynamic systems, 7 also used to study the behaviour of persistent organic pollutants at a global level. 8,9 The number of compartments also increased as the original four were often subdivided into a number of boxes (e.g.…”

MAM-An Aquivalence-based Dynamic Mass Balance Model for the Fate of Non-Volatile Organic Chemicals in the Agricultural Environment

“…Sehmel [14] sub-divided the dry-particle-bound deposition into three processes: particle sedimentation, particle impaction and diffusion [15] . Whereas, for NVOCs, the diffusion process from the surface compartments to the atmosphere is neglected [16] . Moreover, the dominant mechanisms that convey chemicals transport from vegetation to soil are also occurring under wet (i.e., canopy throughfall) and dry (i.e., litterfall) conditions [2] .…”